Article guide
The same 32-centimetre cooker may not be the same. Desktop and cabinet description structures, electromagnetic and gas-described heating, and spin button and smart screen description controls; these dimensions cannot be substituted for each other. Before judging price differentials, complete model numbers and delivery content should be aligned, otherwise the so-called cheap one might be another.
Middleby, when talking about online procurement, referred to the functions, design and prices that could be compared with different models. The key to making this facility a reliable judgement is not to find the number of commodities, but to retain a truly different condition in the comparative table. The four current public pages are checked below to show how to create a configuration comparison, without actual quotations and without guessing the code rules for model letters.
The four models are written in two tables.
The following was visited on 7 October 2006 and is a page-named information. Retain the original formulation in case of differences in technical parameters and abstracts and not amend them to appear consistent values. The specific supply configuration still requires official information.
| Full Model | Page structure and heat source description | Control Mode | Page Scale Power | Page Rating voltage |
|---|---|---|---|---|
| G32D1A | Desktop support, electromagnetic. | Slide and Rotate | 5000 W | 220V ~ 50Hz |
| G32DAA | Electromagnetic. | Slide and Rotate | 5000 W | 220V ~ 50Hz |
| G32DG | A cabinet-style intelligence. | Smart Screen | 5000 W | 220V ~ 50Hz |
| G32DCR | Three heads, gas. | Button reconciliation. Smart timing. | 100Wx3 | 220V ~ 50Hz |
Four rows are from the same page. [2][3][4][5] G32DCR is a gas heating device, but both rated voltage and power are shown on the page. The BW by three cannot replace the gas heat load, nor can it be claimed that it is less energy-intensive than the Electromagnetic Cooking; the public pages do not give the gas heat load and complete gas installation conditions that can be used for this comparison, which need to be obtained separately.
| Full Model | The original text of the pan diameter bar | Scorch weight bar original | Whole machine size in millimeters |
|---|---|---|---|
| G32D1A | 320mm | 2.5 KG | 470 x 690 x 700 |
| G32DAA | 320mm | 2.5 KG | 550 x 800 x 1350 |
| G32DG | 320 x 320 mm | 2.5 KG | 550 x 800 x 1350 |
| G32DCR | 320 x 320 mm | 2.5KGx3 | 1590x800x1350 |
The title of the page in the third and fourth rows is described with 32 pans, while the parameter bar is written in two three hundred and twenty times. These words alone do not determine whether the caliber and depth, the two direction dimensions or the editorial error, so that the original values are retained and listed in the table for clarification, and they cannot be declared to be fully equivalent to the individual 300 mm diameter. [4] [5]
Nor is the weight of all vegetables, the ratio of raw materials and the conditions of the process. It can serve as a clue to continuing discussions on loading and cannot be directly converted to an hourly meal. The three-headed three-by-three, let alone three times the total production line of the shop, is bound to triple; the distribution, operator and delivery positions may still limit output.
What are the real differences beyond the same size?
G32D1A and G32DAA have the same page power, control writing and different structure and shape. The level of support and operation required for desktop equipment should be seen in comparison, and the drop-off and release of the container equipment should not be abbreviated to the same electromagnetic machine. The whole machine size describes the machine ' s shape and does not include all the installation and maintenance space.
G32DAA has the same page size and controls as G32DG. The smart screen does not automatically prove that any custom formulation, network or reduced training can be saved, and the function must be described in the corresponding version. What is really needed in the kitchen is how an operation is done, whether the staff understands the anomaly and what is to be done to restore it, and not just whether or not it is on the screen.
G32DCR ' s three gas structures have changed the mix of resources. The parallelity of the three tasks depends not only on the level of the pot, but also on the personnel, supply of raw materials and energy conditions; both gas and electrical information need to be checked against actual configuration. The page has a smart timer and cannot be combined with the functionality of another type of smart screen into the same control system.
These differences should be explained by the known facts and it is not appropriate to invert from the last letter of the model. Without a formal manufacturer's coding statement, the rule that “a letter must represent an energy source” is not established to prevent subsequent misuse of another product line.
We're gonna keep the same task that we can't add up. Volume
Assuming that the door shop would have to complete three different formulations in the same delivery window, the single-pot programme would have to describe the relationship between the pots and the three-pot programme would have to describe the arrangements for both preparation and operation. It is possible to line up on paper without immediately moving three units into the kitchen. If there is only one qualified operator and multiple steps have to be handled in person, the addition of a pot does not automatically increase the number of actions that can be performed simultaneously.
On the other hand, the nominal load weight does not demonstrate that the two machines were processing the same formulation at the same time. The composition of the foods, their binding status, the order of the inputs and the endpoints of the products are different, leaving no basis for the hourly production that directly separates them. Replacement preparation, removal of finished products and required clean-up omissions are also calculated as ideal running values and not the capacity of the class to commit to delivery.
Energy comparison requires another set. Electricity is a power information under a rated condition, and the actual amount of electricity used depends on the state of operation and duration; the gas programme should also measure the corresponding fuel separately. To compare the cost of energy for the same mission, real consumption should be recorded within the appropriate boundary and, using unit prices of the same date, calibration, the value of electricity and gas should not be added directly, and the smaller power power should not be labelled as energy-saving for gas generators.
Let's assume that two offers eliminate the gap.
The following is just an example of the calculation, the amount of which is all hypothetical and not related to the price of the four products. Programme A equipment is valued at $10,000, with a necessary annex of $800 and a transport of $200; the same annex and transport are included in the second column of $10,800. If the tax caliber, the scope of installation and other conditions are the same, the total amount of this range is $11,000 and 200 below B, rather than 800 below the unit cost of the equipment.
If installation costs for A have not been determined, the above subtotal cannot be referred to as the total landing price. Zeroes cannot be filled in to allow tables to calculate rankings. The extent of the unknown costs should be marked against the contributing party and formally confirmed. Alternative services in different programmes cannot be counted and excluded.
When checked with different suppliers, a uniform requirement may be made to specify the complete model, supply configuration, quantity, calibration of taxes, transport arrival, handling installation, commissioning training, attachments and after-sales range. The duration of the warranty is the same, and coverage of components, labour, travel and response arrangements may still be different, and specific content should be retained and not subject to a “sold-on-sale” tick.
Formal price differences may arise from configurations, service lines, delivery dates or commercial conditions, but without actual quotations and written explanations, only the reasons for the need for reconciliation can be listed, and it cannot be claimed that a price is due to better materials or longer life. The original quotation should be retained in its entirety and the comparison table should be summarized and not replace the original document.
After alignment, verify fit rather than sort immediately
The list of tasks to be fulfilled and the conditions on the ground should be set before deciding which candidates are worthy of further validation. If the project does not have gas-compatible conditions, the project cannot be considered a general draw item because of a low price for a gas engine; if the stage carrying condition is not confirmed, the installation should not be considered simple on the basis of a smaller desktop.
In case of a test, use of the identified permitted process, food and load, to be carried out by the trainees in accordance with the safety programme, to observe the material, wash and recovery of the next pot. Do not burn or expand the mass to the limit. The performance of the same task can be compared with the different options, but the results are still subject to test conditions and are not a substitute for formal engineering judgements.
The subject of the check upon arrival should return to the full version selected. When differences arise between the machine sign, accompanying documents, actual attachments and the contract description, it is clear whether the name is short or the material configuration changes, and is treated as agreed, and the form cannot be changed by the procurement staff to the contents of the goods.
The value of these two tables is to reveal the differences that are currently known and the questions that still need to be answered, and to enable the procurement staff who subsequently took over to understand the basis for the selection. The price ranking of the four units could not be based solely on a common boiler path; the formal offer would have an explanatory meaning only if the mandate, configuration and range of services reached the same comparable calibre.
References
Selection support
Need a clearer equipment plan?
Share your kitchen scene and target products so our team can help confirm practical options
Tags